4 In 1 Charger Discharger Boost 5V 2.1A Module for 3.7V 4.2V Battery DIY Mobile Power with Button
R74.90 Inc VAT
trigger: input LOW(grounding)
Single Chip Using: If Small load KEY connect 20S single chip and supply with input LOW, the module will work well.
Specifications
About module pins
1 VIN: charge port
2 GND: charge port -
3 BAT: Battery
4 GND: Battery -
5 GND: output -
6 VOUT: output
7 KEY: trigger
Note:
1. In discharging mode(charging mode KEY function invalid), trigger KEY one time,output open; trigger two times, output close.
2. Output will open automatically if you connect load. If load below 50MA, the module will turn off output port; if load over 50MA, output port will always open.
3. Allow charging and discharging at the same time(output voltage should below 5V. Stop charging and stop discharging,you should reactivation the module.)
What's in the box?
1 x power module
1 x button
Resources
1. Charge/Discharge: All cables
2. Charge: Connect power supply and battery
3. Discharge: Connect battery and output
Single Chip Using: If Small load KEY connect 20S single chip and supply with input LOW, the module will work well.
Specifications
- Charge voltage: DC 4.5V-5.5V(Recommend DC 5V)
- Charging current: 0-2.1A
- Charge quiescent current: 100uA
- Full charge voltage: 4.2V -1%
- Discharge current: 0-2.4A
- Discharge quiescent current:50uA
- Discharge conversion efficiency: MAX 96%
- Output voltage: 5V
- Output current: 0-2.4A
- Operating ambient temperature: -20°to 85°
- Size: 25x16x4mm
- Weight: 2.3g
- PCB board design: Immersion Gold
- Battery protection: OCP/OVP/SCP/OTP
About module pins
1 VIN: charge port
2 GND: charge port -
3 BAT: Battery
4 GND: Battery -
5 GND: output -
6 VOUT: output
7 KEY: trigger
Note:
1. In discharging mode(charging mode KEY function invalid), trigger KEY one time,output open; trigger two times, output close.
2. Output will open automatically if you connect load. If load below 50MA, the module will turn off output port; if load over 50MA, output port will always open.
3. Allow charging and discharging at the same time(output voltage should below 5V. Stop charging and stop discharging,you should reactivation the module.)
What's in the box?
1 x power module
1 x button
Resources
1. Charge/Discharge: All cables
2. Charge: Connect power supply and battery
3. Discharge: Connect battery and output
- Availability: 19 In Stock
- Model: charge/discharge power module
-
Brand:
