10-bit ADC (SPI) MCP3008 - 8 Channel

R74.90  Inc VAT
Order Quantity Price Per Item
3 R73.40
10 R72.28
Qty:
Add to Cart
Print
Add to wish list - You'll need to login first.
The Raspberry Pi is a great computer but there's just one thing that most hardware hackers will find missing: a few inputs for connecting analog sensors. This is where the MCP3008 chip comes in handy, with eight 10-bit channels accessible over SPI. Thanks to the Raspberry Pi's SPI interfaces and its two 'Chip Select' pins available off of the main GPIO connector, the problem is solved.

Features

  • 10-bit resolution
  • ± 1 LSB max DNL
  • ± 1 LSB max INL
  • 8 input channels
  • Analog inputs programmable as single-ended or pseudo-differential pairs
  • On-chip sample and hold
  • SPI serial interface (modes 0,0 and 1,1)
  • Single supply operation: 2.7V - 5.5V
  • 200 ksps max. sampling rate at VDD=5V
  • 75 ksps max. sampling rate at VDD=2.7V
  • Low power CMOS technology
  • 5 nA typical standby current, 2 µA max.
  • 500 µA max. active current at 5V
  • Industrial temp range: -40°C to 85°C

Applications

  • Sensor Interface
  • Process Control
  • Data Acquisition
  • Battery Operated Systems

What's in the box?

1 x 10-bit ADC 8 Channel IC

Resources

The following sample assumes that you're running the latest official Raspbian distribution, that you're logged in as root and that you haven't yet customized Raspbian to use SPI from a Python script. By default, the kernel module managing SPI communications is not loaded on Raspbian, so let's ensure that the 'spidev' device is available.

root@raspberrypi:/# lsmodModule                  Size  Used by  snd_bcm2835            12808  0  snd_pcm                74834  1 snd_bcm2835  snd_seq                52536  0  snd_timer              19698  2 snd_seq,snd_pcm  snd_seq_device          6300  1 snd_seq  snd                    52489  5 snd_seq_device,snd_timer,snd_seq,snd_pcm,snd_bcm2835  snd_page_alloc          4951  1 snd_pcm

If 'spidev' device is not listed, we need to remove it from the kernel module 'blacklist' so that it's automatically loaded on the next boot:

root@raspberrypi:/# nano /etc/modprobe.d/raspi-blacklist.conf

Put a hash character in front of the 'blacklist spi-bcm2708' statement and save the file:

#blacklist spi-bcm2708

then, manually load the SPI device:

root@raspberrypi:/# modprobe spidev

The command should just complete without returning an error. Validate the list of modules:

root@raspberrypi:/# lsmod  Module                  Size  Used by  spi_bcm2708             4401  0  spidev                  5136  0  snd_bcm2835            12808  0  snd_pcm                74834  1 snd_bcm2835  snd_seq                52536  0  snd_timer              19698  2 snd_seq,snd_pcm  snd_seq_device          6300  1 snd_seq  snd                    52489  5 snd_seq_device,snd_timer,snd_seq,snd_pcm,snd_bcm2835  snd_page_alloc          4951  1 snd_pcm

The 'spidev' device should now be available.

Next, install the 'git' package. It will be needed to install other packages from Github.

apt-get install git-core

Install the 'python-dev' package. It will be needed to compile the 'py-spidev' package.

apt-get install python-dev

Download and compile the 'py-spidev' package.

root@raspberrypi:/# cd /home  root@raspberrypi:/home# git clone git://github.com/doceme/py-spidev  root@raspberrypi:/home# cd py-spidev/  root@raspberrypi:/home# python setup.py install

At this point, SPI is available from Python 2.7. Assuming that you have wired the MCP3008 to the Raspberry Pi's SPI bus using CE0 as the 'chip select' pin, you can read all eight analog inputs using the following Python script.

root@raspberrypi:/home# nano adc.py

Paste the script below in the editor and save it.

import spidev  import time    spi = spidev.SpiDev()  spi.open(0,0)    # read SPI data from MCP3008 chip, 8 possible adc's (0 thru 7)  def readadc(adcnum):          if ((adcnum > 7) or (adcnum < 0)):                  return -1          r = spi.xfer2([1,(8 adcnum)<<4,0])          adcout = ((r[1]&3) << 8)   r[2]          return adcoutwhile True:          for adcInput in range(0,8):                  print "ADC(", adcInput,")=", readadc(adcInput)          time.sleep(1)

To execute the script

root@raspberrypi:/home# python adc.py

Sample output using a 10K Ohm trimpot connected to the ADC's pin 3 and all other pins pulled down to ground using a 10k resistor.

ADC( 0 )= 0  ADC( 1 )= 0  ADC( 2 )= 0  ADC( 3 )= 507  ADC( 4 )= 0  ADC( 5 )= 0  ADC( 6 )= 0  ADC( 7 )= 0

Credits go to Jeremy for his work on the 'py-spidev' Python module which makes working with the MCP3008 straight forward. Alternatively, checkout wiringPi's SPI functions if you prefer using a 'C' API.

Related Tutorials & Samples

  • Availability: 53 In Stock
  • Model: 10-bit ADC 8 Channel
  • Brand: Generic0