Clear Acrylic Raspberry Pi 3B/3B+/4/5 open VESA Lite case/bracket(for 100x100 mount)
R99.90 Inc VAT
This case was designed for the Raspberry Pi 5 board with space to install the Official Active Cooler (The Raspberry Pi 5 board and Active Cooler are NOT Included)
This DIY case requires assembly. You will need a small precision flathead screwdriver.
This DIY case requires assembly. You will need a small precision flathead screwdriver.
Clear 3mm Acrylic Panels to protect your Raspberry Pi 5.
Features
- Open for 40PIN GPIO, PCIe, DSI/CSI Interfaces
- Easy To Pull & Plug TF Card On The Bottom
- Will work with RPi3 B/B+, RPi4 and RPi5 boards
- 75/100 VESA mounting plate included
- Before you mount the VESA plate, turn the case to have your RPi cables facing up/down/left/right as per your environmental requirements.
What's in the box?
1 x Top plate
1 x VESA plate
4 x M4 Nylon screws
4 x Acrylic spacers
4 x M2.5x5mm MF standoffs
4 x M2.5x18mm FF standoffs
8 x M2.5x6 screws
Resources
How To Install
The VESA board was designed to have the cables on your Pi face any direction that you might require. Keep this in mind when attaching the plate to your Monitor/TV
- Install the M2.5x5 MF standoffs on the VESA plate with the M2.5 screws on the monitor side of the plate and the male side of the standoffs facing away to mount the RPi.
- Use the M2.5x18 FF standoffs to screw down the RPi on the short standoffs.
- This would be a good time if you wanted to mount an active cooler onto your RPi 5.
- Use the M2.5x6 screws to screw down the top plate on the 18mm FF standoffs
- You are now ready to mount the VESA plate onto your monitor/TV. Turn the case to have your RPi cables face in whichever direction works best for you.(up/down/left/right) Push the nylon screws through the VESA plate, through the spacers and screw them into your monitor VESA holes.
- All done. You can now plug in your cables, drives etc. and start up your RPi.
- Availability: 25 In Stock
- Model: VESA Lite case
-
Brand:
