2.0mm 1.5m Desoldering Braided Solder Remover Wick
R37.90 Inc VAT
Desoldering braid or “wick” is a pre-fluxed copper braid that is used to remove solder, which allows components to be replaced and excess solder (e.g. bridging) to be removed.
Specifications
What's in the box?
1 x 2.0mm 1.5m Desoldering Wick CP-2015
Resources
How to desolder
How to use
1.Place the desoldering wick over the solder to be removed,then put the heated soldering iron tip onto the desoldering wick.The solder will be absorbed.
2.Remove the desoldering wick after the solder has been absorbed.
3.Cut off the used section of the wick using nippers.
4.Repeat steps 1,2 and 3 if the solder is not removed completely.
Absorption may differ depending on the type of solder.Sn63% and 60% (tin content) have good absorption ability.
Specifications
- Type : CP-2015
- Length : 1.5M
- Width : 2.0mm
What's in the box?
1 x 2.0mm 1.5m Desoldering Wick CP-2015
Resources
How to desolder
How to use
1.Place the desoldering wick over the solder to be removed,then put the heated soldering iron tip onto the desoldering wick.The solder will be absorbed.
2.Remove the desoldering wick after the solder has been absorbed.
3.Cut off the used section of the wick using nippers.
4.Repeat steps 1,2 and 3 if the solder is not removed completely.
Absorption may differ depending on the type of solder.Sn63% and 60% (tin content) have good absorption ability.
- Availability: 20 In Stock
- Model: 2mm desolder wick
-
Brand:
-
Soldering Iron 40W
R44.90 Inc VAT R89.90 -
Soldering Iron 60W
R49.90 Inc VAT R99.90
-
25cm Organiser box - PRIDE
R79.90 Inc VAT -
38cm Organiser box - PRIDE
R139.90 Inc VAT -
6mm Clear Tubing - Thin Wall - per meter
R9.90 Inc VAT -
6mm Clear Tubing - Thick Wall - per meter
R13.90 Inc VAT
