Universal Acrylic open GPIO Case with fan, grill and flared heatsink for Raspberry Pi 3/4/5

Please Note: Raspberry Pi is not included
The included fan is powered from the GPIO pins

This DIY case requires assembly. You will need a small precision flathead screwdriver. The fan is powered from GPIO.

Features

• Two-part Raspberry Pi case for Pi 3, Pi 4 and Pi 5.
• Easy access to all Pi connectors
• Open design to keep your Raspberry Pi cool
• You can mount a HQ cam onto this case. See the hint at the end of the description.

 
What's in the box?

2 x DIY Acrylic Case layers
1 x 30mm fan that gets powered from GPIO(Not the RPi5 fan adapter)
1 x 30mm fan grill
1 x flared processor heatsink
4 x 5mm standoffs
4 x 25mm standoffs
8 x M2.5x6 screws
4 x M3x16 screws
4 x M3 nuts
4 x rubber feet

As from 11/12/2023 we add a black heatsink (19x14x7) to this kit. You can now choose which heatsink fits your RPi processor best.

You might also like to add the RPi 5 fan that is OS controlled.

Case Assembly guide

1. Remove the acrylic protective film from the two plates
2. Install the standoffs first. Push the male part of the short standoffs through the RPi board mounting holes from the bottom upwards. Use the Female Female standoffs as nuts on the top of the RPi board. 
3. Mount the fan and fan grill on the top acrylic plate.
4. Mount the top and bottom acrylic plates using the eight M2.5x8 screws.
5. Connect your fan power cable to the GPIO port.

Hint

Why are there four extra holes on the bottom plate?

If you buy four 5mm standoffs with M2.5 nuts and M2.5x4 screws, you'll be able  to mount an HQ camera on the bottom plate of the case, on which you can then add a tripod.

• Availability: 38 In Stock
• Model: Pi345 open GPIO case
• Brand: