Raspberry Pi
This is a practical, yet elegant Raspberry Pi Ceramic mug from the Raspberry Pi Foundation. Let your Raspberry Pi spirit shines :) Be the envy of everyone in your office with the new Raspberry Pi mug!
- Red color with White Raspberry Pi Logo
- Dishwasher safe
- 80mm diameter x 90mm tall
- 330ml capacity
- Bright and colorful!
The team at Raspberry Pi Foundation has extensively tested these mugs and can confirm that they are tea-, coffee-, and hot chocolate-compatible. They can also be used for cold drinks if that's your preference.
Note: While tested to over 1,000 domestic dishwasher cycles, it is recommended that you hand-wash this mug to keep it in tip-top condition.
Packing List:- 1 x Raspberry Pi Red Ceramic Mug
Please note: The case is not included
The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users, it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load.
The temperature-controlled fan delivers up to 1.4 CFM of airflow over the processor, memory, and power management IC. The bundled 18mm × 18mm × 10mm heatsink with self-adhesive pad improves heat transfer from the processor.
Specifications
- Input voltage: 5V DC supplied via 40-pin GPIO header on Raspberry Pi 4
- Fan speed control: Pulse width modulation control via user-selectable GPIO pin
- Maximum airflow: 1.4CFM
- Case Material: Clear PC
- Fan size: 25mm x 25mm x 7mm
- Compliance: For a full list of local and regional product approvals please visit: www.raspberrypi.org/documentation/hardware/raspberrypi/conformity.md
- Fits perfectly into the lid of the official Raspberry Pi 4 Case
- Temperature-controlled fan delivers up to 1.4CFM of air flow over the processor, memory and power-management IC
- 18mm × 18mm × 10mm heatsink with self-adhesive pad improves heat transfer from the processor
What's in the box?
1 x 25mm x 25mm x 7mm fan
1 x 18mm × 18mm × 10mm heatsink
1 x housing for fan
Fitting Instructions
1 Insert Raspberry Pi 4 unit into the lower half (base) of the case, taking care to first remove any SD card, and to align the connectors with the apertures in the base.
2 Insert the case fan into the upper half (lid) of the case, with the fan pointing away from the lid. The two tabs on the fan housing should fit neatly into the inside of the tabs on the lids, and the slightly curved edge of the housing should be flush with the underside of the lid.
3 If you are also fitting the heatsink, remove the backing paper from the selfadhesive pad on the base of the heatsink, position it centrally over the processor and gently press it in position.
4 Connect the wires from the fan to the Raspberry Pi 4 40-pin GPIO header as follows:
Lead Colour GPIO Pin
5v RED 4
Ground BLACK 6
GPIO 14 BLUE 8
5 Assemble the case.
Using your fan
Once you have connected your fan, by default it will be on whenever your Raspberry Pi is running. You can configure it to turn on only when your Raspberry Pi reaches a temperature that you choose.
Using a recent version of Raspberry Pi OS, first update to retrieve any recent changes to the operating system:
- Open the Terminal, either from the Start menu (click the Raspberry Pi icon in the top left corner) or by pressing Control Alt T.
- Type sudo apt update and then, when the update has finished, type sudo apt full-upgrade.
Then open the Raspberry Pi Configuration tool:
- Click on the Raspberry Pi icon in the top left corner and select Preferences then Raspberry Pi Configuration.
- Select the Performance tab.
- Next to Fan, click Enabled.
- If you have connected your fan as shown above, the default of 14 for Fan GPIO does not need to be changed.
- Select the Fan Temperature at which you want your fan to turn on. The default is 80°C, which will stop the Raspberry Pi throttling on difficult tasks without having the fan on all the time.
Specifications:
- HDMI plug to HDMI plug leads
- Compatible with Raspberry Pi 3 Model B, Pi 3 Model B and Pi 3 Model A and all previous Raspberry Pi models
- Triple layer shielding for better performance from WiFi and Bluetooth connectivity
- HDMI 2.0 with Ethernet and audio return channel
- Nickel plated OFC connectors
- Officially licensed by the Raspberry Pi foundation
What's in the box?
1 x HDMI cable
Overview
Featuring a quad-core 64-bit processor, wireless networking, dual-display output and 4K video playback, Raspberry Pi 400 is a complete personal computer, built into a compact keyboard.
Raspberry Pi 400 is ideal for surfing the web, creating and editing documents, watching videos, and learning to program using the Raspberry Pi OS desktop environment.
Raspberry Pi 400 is available in a number of different regional variants and as either a computer kit, containing everything you need to get started (except for a TV or monitor), or a computer unit only.
Raspberry Pi 400 for working and learning at home
Specifications
Processor: Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.8GHz
RAM: 4GB LPDDR4-3200
Connectivity: Dual-band (2.4GHz and 5.0GHz) IEEE 802.11b/g/n/ac wireless LAN, Bluetooth 5.0, BLE Gigabit Ethernet
2 × USB 3.0 and 1 × USB 2.0 ports
GPIO Horizontal 40-pin GPIO header
Video & sound: 2 × micro HDMI ports (supports up to 4Kp60)
Multimedia: H.265 (4Kp60 decode);
H.264 (1080p60 decode, 1080p30 encode);
OpenGL ES 3.0 graphics
SD card support: MicroSD card slot for operating system and data storage
Keyboard: 78- or 79-key compact keyboard (depending on
regional variant)
Power: 5V DC via USB connector
Operating temperature: 0°C to 50°C
Dimensions: 286 mm × 122 mm × 23 mm (maximum)
What's in the box?
1 x Raspberry Pi400 unit only(US keyboard)
Compliance: For a full list of local and regional product approvals, please visit
www.raspberrypi.org/documentation/hardware/raspberrypi/conformity.md
WARNINGS
• Any external power supply used with Raspberry Pi 400 shall comply with relevant regulations and
standards applicable in the country of intended use.
• This product should be operated in a well-ventilated environment and should not be covered when
being operated.
• The connection of incompatible devices to Raspberry Pi 400 may affect compliance, result in damage to the unit, and invalidate the warranty.
• There are no user-serviceable parts inside Raspberry Pi 400, and opening the unit is likely to damage the product and will invalidate the warranty.
• All peripherals used with this product should comply with relevant standards for the country of use
and be marked accordingly to ensure that safety and performance requirements are met. These
articles include, but are not limited to, mice, monitors and cables when used in conjunction with
Raspberry Pi 400.
• The cables and connectors of all peripherals used with this product must have adequate insulation so that relevant safety requirements are met.
• Prolonged exposure to direct sunlight may cause discoloration.
SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture whilst in operation.
• Do not expose to heat from any source; Raspberry Pi 400 is designed for reliable operation at normal ambient temperatures.
• Take care whilst handling to avoid mechanical or electrical damage to the computer.
Accreditation
Raspberry Pi Codec Zero is a Raspberry Pi Zero-sized audio HAT that delivers bi-directional digital audio signals (I2S) between a Raspberry Pi and the Codec Zero’s on-board Dialog Semiconductor DA7212 codec, and allows you to use a variety of input and output devices. With features such as programmable green and red LEDs, plus a tactile button for user input, Codec Zero makes a great starting point for audio projects such as a walkie-talkie, intelligent doorbell, smart speaker, or vintage radio hack. Previously known as IQaudio Codec Zero.
Specifications
- Check out our audio boards documentation for help selecting and using Raspberry Pi audio boards.
- The Raspberry Pi Codec Zero is compatible with any Raspberry Pi computer that has a 40-pin GPIO header.
- Form factor: 65 mm × 31 mm
- Performance: High definition 24-bit 96kHz Dialog Semiconductor DA7212 digital audio codec (DAC)
- Input power: Supplied by Raspberry Pi through the 40-pin GPIO header. No external power source required
Features
- Power LED
- Additional green (GPIO23) and red (GPIO24) LEDs for status
- Tactile button (GPIO27) for user input
- Built-in mono electret microphone (MEMS)
- HAT EEPROM write-enabled
Supports
- Additional external mono electret microphone via 3.5mm panel-mounted barrel socket
- 1.2W 8Ω mono speaker via panel-mounted screw terminals
- Stereo input and output channels, including external phono (RCA) sockets, via AUX IN and AUX OUT pins
Operating temperature: 0°C–50°C
What's in the box?
1 x Codec Zero board
Resources
Be the coolest cat in class with this eye-catching official Raspberry Pi t-shirt, showcasing components, circuitry and other crafty coding goodies.
Features a stylish, high quality print in shades of red, on a super soft heather grey cotton t-shirt.
Adult Size Small
Be the coolest cat in class with this eye-catching official Raspberry Pi t-shirt, showcasing components, circuitry and other crafty coding goodies.
Features a stylish, high quality print in shades of red, on a super soft heather grey cotton t-shirt.
Adult Size Medium
Be the coolest cat in class with this eye-catching official Raspberry Pi t-shirt, showcasing components, circuitry and other crafty coding goodies.
Features a stylish, high quality print in shades of red, on a super soft heather grey cotton t-shirt.
Adult Size Large
Be the coolest cat in class with this eye-catching official Raspberry Pi t-shirt, showcasing components, circuitry and other crafty coding goodies.
Features a stylish, high quality print in shades of red, on a super soft heather grey cotton t-shirt.
Adult Size XL
Be the coolest cat in class with this eye-catching official Raspberry Pi t-shirt, showcasing components, circuitry and other crafty coding goodies.
Features a stylish, high quality print in shades of red, on a super soft heather grey cotton t-shirt.
Adult Size XXL
Specifications
- Certified organic cotton
- 155g/m2
- GM free
- Not tested on animals
- Does not contain animal-derived products
- Printed in the UK with low-waste printing tech
Maintaining your tee: wash cool and hang dry to ensure print quality and longevity.
Printed by Rapanui, this tee features the iconic Raspberry Pi logo on red organic cotton.
What's in the box?
1 x Official Raspberry Pi Red Shirt
Already have a standard HDMI cable? This handy adapter is what you need to connect to your Raspberry Pi Zero mini HDMI adapter.
What's in the box?
1 x 10cm mini HDMI adapter
Use this cable to connect your VGA display to Raspberry Pi 4 , Raspberry Pi400 or Raspberry Pi 5.
What's in the box?
1 x 1m micro HDMI to VGA black cable
What's in the box?
1 x Raspberry Pi Laser Engraved Drinks Bottle(235mm x 65mm)
What's in the box?
1 x Raspberry Pi Design - Natural Cotton Tote Bag(420mm x 380mm)
Finally available following public demand after so many of you spotted this mug on Raspberry Pi Tweets and images, this Black Design Raspberry Pi mug is the ultimate holder of coffee, tea and other late-night project beverages!
With a 330ml capacity for your favourite brew combined with superb styling, this mug is a great companion for Raspberry Pi makers and fans across the planet. Get dipping those biccies!
We also stock the original red design! Don't forget to grab a coaster whilst you're at it
Features:- Black colour with White Raspberry Pi designs
- Dishwasher safe
- 80mm diameter x 90mm tall
- 330ml capacity
- Bright and colorful!
The team at Raspberry Pi Foundation has extensively tested these mugs and can confirm that they are tea-, coffee-, and hot chocolate-compatible. They can also be used for cold drinks if that's your preference.
Note: While tested to over 1,000 domestic dishwasher cycles, it is recommended that you hand-wash this mug to keep it in tip-top condition.
What's in the box?1 x Raspberry Pi Black Ceramic Mug
The Raspberry Pi Sense HAT V2 is the perfect product to learn about programming and how we interact with the world around us. With its full array of sensors, the Sense HAT was originally developed for use on the International Space Station, as part of the educational Astro Pi programme run by the Raspberry Pi Foundation in partnership with the European Space Agency.
It is well suited to many projects that require position, motion, orientation, or environmental sensing. The Sense HAT is powered by the Raspberry Pi computer to which it is connected.
An officially supported Python library provides access to all of the on-board sensors, the LED matrix, and the joystick. The Sense HAT is compatible with any Raspberry Pi computer with a 40-pin GPIO header.
HAT standoffs and fixings included! New Sense HAT Case now available!
Features
The Raspberry Pi Sense HAT V2 is attached on top of the Raspberry Pi via the 40-pin GPIO pins (which provide the data and power interface) to create an ‘Astro Pi’.
The Sense HAT has several integrated circuit based sensors can be used for many different types of experiments, applications, and even games.
The sensors enable you to read:
- Gyroscope
- Accelerometer
- Magnetometer
- Temperature
- Barometric pressure
- Humidity
- Colour and brightness
The LED Matrix enables you to display the data from the various sensors, it can show you which way is geomagnetic North by programming a compass using the magnetometer or simply be used to play games like Tetris, Pong and Snake with the joystick. The joystick can also be used to enable a human user to interact with the programs running on the Raspberry Pi Sense HAT.
Technical Specification
| Pressure/temperature sensor | STMicro LPS25HB 260 to 1260 hPa absolute pressure range 24-bit pressure data output 0 to +65°C accurate temperature measurement range (±2°C) 16-bit temperature data output |
| Humidity temperature sensor | STMicro HTS221 0 to 100% relative humidity range 15 to 40°C accurate temperature measurement range (±0.5°C) 16-bit data output |
| IMU | STMicro LSM9DS1 Accelerometer/gyroscope/magnetometer ±16g acceleration measurement range ±16 gauss magnetometer measurement range ±2000dps gyroscope measurement range 16-bit resolution for each measurement channel |
| Colour Sensor | TCS3400 RGB colour and brightness sensor |
| LED matrix | 8×8 RGB LED display |
| Joystick | 5-button miniature joystick with up, down, left, right, and middle-click |
What's in the box?
1 x Sense HAT V2
Resources
Specifications
Resolution: 5MP
Aperture: F2.4
Mount: M12
Focal Length: 25mm
Image Format: 1/2"
FOV(D/H/V): 18.3°/14.7°/11.1°
What's in the box?
1 x M12 lens
Specifications
Resolution: 12MP
Aperture: F2.5
Mount: M12
Focal Length: 2.7mm
Image Format: 1/2.3"
FOV(D/H/V): 184.6°/140°/102.6°
What's in the box?
1 x M12 lens
Specifications
Resolution: 12MP
Aperture: F1.8
Mount: M12
Focal Length: 8mm
Image Format: 1/1.7"
FOV(D/H/V): 72.64°/57.12°/42.44°
What's in the box?
1 x M12 lens