Raspberry Pi Official Pi3/ZERO/Pico Micro USB Power Supply 5.1V 2.5A square white

This Official Rapsberry Pi PSU supports up to 2.5A of current, so it won't let you down when powering hungry devices through your Raspberry Pi 3 Model B, Zero and Pico


Output

• Output voltage: 5.1V DC
• Minimum load current: 0.0A
• Nominal load current: 2.5A
• Maximum power: 12.5W
• Load regulation: ±5%
• Line regulation: ±2%
• Ripple & noise: 120mVp-p
• Rise time: 100ms maximum to regulation limits for DC outputs
• Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
• Protection: Short circuit protection

Overcurrent protection

• Efficiency: 80.73% minimum (output current from 100%, 75%, 50%, 25%)
• Output cable: 1.5m 18AWG
• Output connector: micro USB
  
  

Input

• Voltage range: 100–240Vac (rated) 96–264Vac (operating)
• Frequency: 50/60Hz ±3Hz
• Current: 0.5A maximum
• Power consumption (no load): 0.075W maximum
• Inrush current: No damage shall occur and the input fuse shall not blow
  
  

What's in the box?

1 x Official Power Supply

You will also need a euro plug adapter


WARNINGS

• This product should be operated in a well-ventilated environment.
• The connection of incompatible devices to this power supply may affect compliance, result in damage to the unit and invalidate the warranty.

SAFETY INSTRUCTIONS

To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source; this is designed for reliable operation at normal ambient room temperatures.
• Do not attempt to open or remove the power supply case.