RPICT7V1 V5 100A 7 CT Master with ZMPT101B voltage sensor
Connect up to 7 Current and 1 voltage sensor to a raspberry pi.You can also use these sensor boards with Home Assistant!
- 7x AC Current Ports.
- 1x AC Voltage Ports.(ZMPT101B voltage sensor included)
- Provides Irms, Vrms, RealP, ApparentP, ReactiveP, PFactor, Frequency, EstimatedP.
- View/record data using Linux / Python / Emoncms / Grafana / MQTT and more.
- Configurable from serial port.
- Open Source Arduino Firmware.
- Stackable with RPICT8 Slave.
What's in the box?
1 x RPICT7V1 Unit.
1 x ZMPT101B voltage sensor(Included as from 16/10/2023)
4 x Mounting Stand off with screws.
As from 23/10/2023 we include a ZMPT voltage sensor
The listing does not include the current sensors and Raspberry pi.
Recommended Current sensors
- SCT-013-000 (100A)
Technical Specifications
| Microcontroler | Atmel Atmega328p |
| MCU Frequency | 16Mhz |
| Operating Voltage | 5V |
| Waveform Sampling | 4400sps |
| Fastest Data Polling | 1400ms (all 7 channels) |
| Vertical Resolution | 12 bits (4096 steps) |
| Communication | UART Serial Port |
| Firmware | Arduino (open source) |
| Dimensions | 56x65mm |
| Programming port | 6 pin ISP |
| Compatible OS | Any supporting GPIO serial port access |
| Compatible Raspberrypi | All of Family 1,2,3,4 and Model A, B |
| Compatible CT | Current output type |
| AC Current Range | 100A |
| AC Voltage Range | 240V |
| Smallest Readable Current | Approx 50mA to 150mA |
Scope of Use
This development board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by LeChacal.com to be a finished end-product fit for general consumer use. Persons handling the product(s) must have electronics training and observe good engineering practice standards. As such, the goods being provided are not intended to be complete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including product safety and environmental measures typically found in end products that incorporate such semiconductor components or circuit boards. This
evaluation board/kit does not fall within the scope of the European Union directives regarding electromagnetic compatibility, restricted substances (RoHS), recycling (WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these directives or other related directives.
- Availability: 4 In Stock
- Model: lec 100A 7 current 1 volt board
-
Brand:
-
100A-1V Split-Core SCT013 AC Current Sensor
R149.90 Inc VAT
